My Computer Won’t Turn On: How To Fix It
When your computer won’t turn on, it can feel alarming — but most causes are simple to fix. Whether your PC shows a black screen, the power light doesn’t come on, or it starts then immediately shuts off, this guide walks through every solution from the easiest fixes to deeper hardware troubleshooting.
Quick Fixes: Check These First
Before doing anything technical, rule out the most common causes:
1. Check the Power Connection
- Desktop: Make sure the power cable is firmly plugged into both the PC and the wall outlet. Try a different outlet.
- Laptop: Connect the charger and verify the charging light comes on. Try a different charger if available.
- Power strip: If using a surge protector or power strip, make sure it’s switched on. Plug directly into the wall to rule it out.
2. Check the Power Button
- Press and hold the power button for 10 seconds, then release and press it normally
- On some cases, the power button can become stuck or disconnected — make sure it clicks when pressed
3. Check the Monitor
Your computer may actually be on but the display isn’t showing:
- Ensure the monitor is powered on and connected
- Try a different display cable (HDMI, DisplayPort, or USB-C)
- Connect to a different monitor or TV to test
- On laptops, press Windows + P or Fn + display key to toggle display output
If There Are No Lights or Sounds at All
When pressing the power button does absolutely nothing — no lights, no fans, no beeps:
4. Perform a Power Drain
This resets the electrical state and fixes many "dead" computers:
For Desktops:
- Unplug the power cable from the back of the PC
- Press and hold the power button for 30 seconds (this drains residual power)
- Plug the power cable back in
- Try turning it on
For Laptops:
- Unplug the charger
- If the battery is removable, take it out
- Press and hold the power button for 30 seconds
- Reinsert the battery and plug in the charger
- Try turning it on
5. Check the Power Supply (Desktop)
- Look at the back of your PC — there may be a power supply switch (I/O toggle). Make sure it’s set to "I" (on)
- If you have a spare PSU or a PSU tester, test the power supply
- A failing power supply is one of the most common reasons desktops won’t power on
6. Check the Battery (Laptop)
- If your laptop is over 3 years old, the battery may be completely dead
- Leave it plugged into the charger for at least 30 minutes before trying to turn it on
- If the charging light doesn’t come on at all, the charger or charging port may be faulty
If the Computer Powers On Then Immediately Shuts Off
When you see lights or hear fans for a second before everything goes dead:
7. Check for Overheating
- Make sure air vents aren’t blocked by dust, blankets, or surfaces
- Open the case (desktop) and check if the CPU cooler fan is spinning
- Compressed air can clean out dust buildup
- A computer that overheats instantly on startup may need new thermal paste on the CPU
8. Reseat RAM and Components
Loose components cause startup failures:
- Unplug the computer and ground yourself (touch a metal part of the case)
- Open the case
- Remove and firmly reseat each RAM stick — push until the clips click
- Reseat the GPU (graphics card) if you have one
- Check all internal power connectors — the 24-pin motherboard connector and CPU power connector
9. Remove Recent Hardware Changes
If you recently installed new RAM, a new GPU, or another component:
- Remove the new hardware and try booting with only the original components
- Incompatible or faulty new hardware can prevent startup entirely
If You See a Black Screen With a Cursor or Error Message
10. Boot Into Safe Mode
- Force-shut down 3 times in a row (hold power button until off, then turn on again) to trigger Windows Recovery
- Select Troubleshoot → Advanced options → Startup Settings → Restart
- Press 4 or F4 for Safe Mode
- If Safe Mode works, the issue is likely a driver or software conflict
11. Run Startup Repair
- Access Windows Recovery (force-shutdown method above, or boot from a USB install drive)
- Select Troubleshoot → Advanced options → Startup Repair
- Let Windows attempt to fix boot issues automatically
12. Check BIOS/UEFI Settings
- Restart and press F2, F12, Delete, or Esc (varies by manufacturer) to enter BIOS
- Check the boot order — make sure your main drive is listed first
- If you see no drives listed, your hard drive/SSD may have failed
- Reset BIOS to defaults if settings were recently changed
If Nothing Else Works
13. Test With Minimal Hardware (Desktop)
Strip the PC down to the bare minimum:
- Motherboard, CPU, one stick of RAM, and power supply only
- Remove GPU, extra RAM sticks, all USB devices, and extra drives
- If it boots with minimal hardware, add components back one at a time to find the culprit
14. Listen for Beep Codes
Many motherboards beep patterns that indicate specific failures:
- One short beep: Normal POST (power-on self-test) — the issue is elsewhere
- Continuous beeping: RAM not detected
- No beep at all: Could be CPU, motherboard, or PSU failure
- Check your motherboard manual for specific beep code meanings
15. CMOS Battery Reset
The CMOS battery maintains BIOS settings. A dead one can cause boot issues:
- Open the PC case
- Find the small round silver battery on the motherboard (CR2032)
- Remove it, wait 5 minutes, then reinsert it
- This resets all BIOS settings to factory defaults
When To Seek Professional Help
Consider taking your computer to a repair professional if:
- You’ve tried all the above steps with no success
- You hear grinding or clicking noises from the hard drive
- You smell burning or see physical damage to components
- The computer was exposed to liquid, a power surge, or physical impact
- You’re not comfortable opening the case
Troubleshooting tested on Windows 11 and Windows 10 desktop PCs and laptops from Dell, HP, Lenovo, ASUS, and Acer. Last updated March 2026 by the DevX editorial team — our hardware specialists have diagnosed and repaired thousands of computers over 15+ years of hands-on experience.



